How to install the Nanopulser 2 In case of the two 12V batteries ■Type1 Connected two 12V batteries in series (Total voltage is 24V) ■Type2 Connected two 12V batteries in parallel (Total voltage is 12V) 12V Battery × 2 ↓ ↓ 12V Battery × 2 ↓ ↓ Install a "Nanopulser PG-24S/24N" Install a "Nanopulser PG-12S/12N" ■Starter battery ┬ Truck ├ Bus ├ Agricultural machine ├ 4WD └ Boat ■Deep cycle ┬ Electronic power chair battery ├ Electronic outboard ├ Electronic sweeper └ UPS ■Starter battery ┬ Van ├ Boat ├ Yacht └ 4WD （Diesel engine） ■Deep cycle ─ Camper-van battery (Sub batteries) Camper-van information Some of the camper-van have two 12V sub-batteries which are connected in parallel. In case of this, install a Nanopulser PG-12N. If the total capacity of the two batteries are over 250Ah, it will need a time to resolve the Sulfation. ■Type 3　Two starter batteries for the boat and yacht Connected two batteries in parallel - Total voltage is 12V If total capacity of the two batteries is over 160Ah(Ampere hour), installing two Nanopulsers is recommended. (over 80Ah*2 batteries) ■Type 4　4WD - cross country vehicle In advance, check the two batteries. (Connected in series or parallel） ■Some of the cross country vehicles Some of the cross country 4WD have two batteries which are connected in parallel. ■Type4-1　4WD - cross country vehicle ■Some of the 4WD └─ PG-24S ─┘ Install a PG-24S （12V*2 = 24V） ■Some of the 4WD Some of the 4WD have two batteries which are connected in series. ■TOYOTA Land Cruiser80 ↑↑ ↑↑ PG-12S PG-12S Install two PG-12S ■Information of TOYOTA Land Cruiser 80 TOYOTA Land Cruiser 80 has two batteries which are set from side to side in the engine room. *Two batteries of the Land Cruiser 80 are checked. Starter motor works by 24V when starting engine. Accessories work by 12V.

TOP > Nanopulser Line-up and price > How to install the Nanopulser 2 How to install the Nanopulser to 12V battery How to install the Nanopulser to 3 batteries Copyright (C) High Grove, Inc. All Rights Reserved.